PRINT

TEMPLATE & SPECIFICATIONS - TEACCH Model Shelving Units

All units were assembled using stain grade finger jointed pine, 3/4 of an inch thick. The back panel is 5/16 masonite press board. After units were assembled they were smoothed, hand-sanded and stained. Staining was done by hand with Min Wax water-based wood stain (White Oak). After one coat of stain was applied and dried it was sanded again using a 220 fine paper. A spray gun was used to coat the units with 5-6 coats of water-based Polycrylic by Min Wax, sanded between each coat. After the units had completely cured, slider feet were applied as the final step.

Downloadable Plans Sargent TEACCH templates.pdf

There were three styles of shelving units that were produced for the Sargent Center Day School Program.

Style 1 has three shelves and is 36” in height and 13.5” in width.

style 1 teacchl

Style 2 has three shelves and is 30” in height and 13.5” in width.

style 2 teacch

Style 3 has two shelves and is 21.5” in height and 13.5” in width.